| Customization: | Available |
|---|---|
| Shape: | Fiberglass Yarn |
| Fiber Characteristics: | E-Glass |
|
Still deciding? Get samples of US$ 0/Square Meter
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Test Strandard | Standard Value | |
| Glass Type | ― | E Glass | |
| Appearance | ― | 1. No Contamination 2. allow the case of light yellow 3. allowing a small amount of fuzz, pile loop on the bobbin ends. |
|
| ― | |||
| tex Linear Density |
GB/T7690.1-2001 | Nominal value ±5% | Nominal value ±8% |
| R2O Content | GB/T1549 | ≤0.80 | ≤0.80 |
| Moisture Content% | GB/T9914.1-2001 | ≤0.10 | ≤0.10 |
| Loss of Ignition% | GB/T9914.1-2001 | 1.20±0.20 | 1.20±0.20 |
| Stiffness mm | GB/T7690.4-2001 | 150±15 | 150±15 |
| Spilt % | ― | ≥85 | ≥80 |
| Weight kg | ― | 17.5±0.5 | ≥15 |
| Resin | ― | UPVE | |
| Product Standard | GB/T 18369-2008 | ||
Notice |
Contact with fiber glass may cause temporary irritation. Wear long-sleeved loose-fitting clothing when handing the material. Gloves and eye protection may be apporopriate in certain operations. Wash with soap and warm water after handing. Use of a disposable mast designed for nuisance.The International Agency for Research on Cancer(IARC) has designated continuous filament fiber glass is not classifiable as to humany carcinogenicity. | ||
1. Low frequency in machine clean-up
2. Fast and complete wet-out.
Unless otherwise specified,fiberglass roving should be stored in a dry, cool and moisture-proof area. Room temperature and humidity should always be maintained at 15°C - 35°C,
35% - 65% respectively.
Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
To ensure safety and avoid damage to the product, the pallets should not be stacked more than two layers high. When the pallets are stacked in two layers, care should be taken to correctly and smoothly move the top pallet.
Q1: Are you a trading company or factory?
){kind=link}