D260 GRP Roofing Wall Fillet Trim

• After-sales Service: Guarantee After-Sales Service
• Material: GRP
• Usage: Roof
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: D260
• Customized: Customized
• Color: Customized
• Length: Customized
• Thickness: Customized
• H.S Code: 3921909090
• Transport Package: Iron Frame
• Specification: D260
• Trademark: Taiwen
• Origin: China
• HS Code: 3921909090
• Package Size: 100.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 2.000kg

Product Description

 

Product Description

The Easy To Use Edge Trim

All of our GRP roof edge trims feature a unique high-adhesion finish that gives an excellent bond to most liquid applied and single-ply systems (tested with both rigid and flexible polyester, polyurethane, acrylic and alkyd systems.) Suitable for flat roofing, cladding, domestic and industrial applications.

D260 GRP Roofing Wall fillet Trim
The D260 GRP Roofing Wall Fillet Trim is fitted where a flat GRP roof meets an adjoining wall or upstand, usually in conjunction with one of our C 100 flashing trims.

3 metre length - Base 75mm - Angle 60mm - Vertical 115mm - Upstand height 140mm (height up your wall from deck)
 

Detailed Photos

 

 

Main Features

 

• Pre formed GRP Roofing Edge trim
• Designed to be easy to use and fit
• Can be easily cut to any required length
• Forms a neat finish to the roof edge
• Topcoat in any colour
• Use in conjunction with C type trims

 

Application

 

Typical Cold Roof 

1. B260 edge trim.	2. D260 edge trim
3. C100 edge trim	4. A200 edge trim
5. C1 universal external corner	6. 18mm OSB3 decking
7. 450g/m2 Chopped Strand Mat	8. GRP laminate( roofing resin reinforced by CSM)
9. Topcoat

 

Edge Trim Application

C100/C100MT/C100L/C100LMT/C150/C150MT/C150L- Sim. Lead Flashing & D260/D300- Fillet Trim

The C trim is a simulated lead flashing, generally fitted in conjunction with the D trim. The D trim is a fillet trim for use against abutting walls. It will also provide expansion and perimeter ventilation and is compatible with C2 and C3 universal corners. Place the D trim against the vertical face and push down diagonally into the corner until the trim fits snugly. Where the D trim needs to be joined it should be bonded with a strip of polyurethane adhesive and bandaged together. The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc. Apply polyurethane adhesive to the back of the C trim every 300mm. Fit the trim into the slot and press firmly back to the wall to overlap the D trim. Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in. A smooth finish can be obtained by wiping the sealant with a moistened finger.

TRIM DETAILS: C100: Standard simulated lead flashing with 100mm vertical face and 35mm wall penetration. Do not topcoat. C100MT: As C100 with self securing moisture trap. C100L (Long leg): As C100 with 50mm wall penetration. C100LMT (Long leg with Moisture Trap): As C100 with 50mm wall penetration and self securing moisture trap. C150: Simulated lead flashing with 150mm vertical face and 35mm wall penetration. Do not topcoat. C150MT (Moisture Trap): As C150 with an integral, self-securing moisture trap. C150L (Long leg): As C150 with 50mm wall penetration. D260: Angle fillet trim with 135 and 70mm flanges. D300: Angle fillet trim with 175mm and 70mm flanges.

 

Cross-Section of C/D Trim Application

Application Notes
GRP flat roof trims can be used to adapt most flat roofing systems to almost any application.
Where two lengths of edge trim need to be joined, a strip of polyurethane (PU) adhesive should be applied along the inside of the overlapping trim.
When constructing a flat roof it is recommended to build a fall into the roof to aid drainage.
Trim fascias may be painted at a later date using any suitable gloss or masonry paint.
If used with a GRP roofing system, GRP edge trims can be laminated over their entire surface area if required or can be finished with topcoat applied directly to the surface of the trim. 
 

Package

FAQ

Q&A for GRP Roof Trim Installation: Learn More about GRP Roof trims 

Q1: How do I fit GRP trims during a fibreglass roofing installation?
A: Fitting fibreglass trims is a crucial step in completing a roofing project. Start by cutting the trims to size and use a suitable polyurethane adhesive (PU) for a strong bond. Carefully glue and secure the trims to prevent leaks and gaps.

Q2: What's the quick guide for fitting GRP trims?
A: Apply PU adhesive to the perimeter batten, ensuring a 30mm bead at 300mm intervals. Secure trims with nails or staples, maintaining a consistent 30mm PU bead. Join trims by nailing or stapling, starting at each end and progressing at 200mm intervals.

Q3: How do I install A170/A200/A250 Drip Trims?
A: Apply PU adhesive to the batten, allowing space for the gutter. Nail the trim to the decking without nailing through the front. A planning machine can be used to ensure a flush fit on minimal-pitch roofs.

Q4: What's the process for B230/B260/B300 Raised Edge Trims?
A: Fix a single batten level with the deck, apply 30mm PU beads every 300mm, and secure the trim with nails. Reinforce the trim for ladder use, either by doubling up or adding an extra layer of GRP laminate.

Q5: How to fit C100 Simulated Lead Flashing?
A: Fit into a bed joint or a deep chase cut, apply PU adhesive every 300mm, press the trim firmly back to overlap with D trim, and seal with clear silicone. C100 features a 100mm vertical face and 35mm wall penetration.